Eldes EPIR Manual de usuario descargar pdf (Pagina 20)

20 EN

EPIR2 User Manual v.1.4

1.14. Receiving an SMS/text message when temperature exceeds the set values

The system comes equipped with a feature intended for temperature measurement in the

surrounding area. This feature allows to monitor the temperature and receive a notication by

SMS text message, identied as the Temperature Info SMS, to user phone number when the set

temperature MIN or MAX boundaries are exceeded. For this purpose you may use the system’s

built-in temperature sensor or one of the temperature sensors incorporated in the wireless

device (if any). The following wireless devices contain a built-in temperature sensor:

ATTENTION: The supported temperature range is -10... +40 °C.

• EWP1 - wireless PIR sensors (motion detectors);

• EWS1 & EWS2 - internal and external sirens;

• EWF1 – wireless smoke detectors;

• EW1 - wireless zone and PGM output expansion module;

• EW1B - battery-powered wireless zone and PGM output expansion module.

By default, temperature measurement feature is disabled. To enable it, please refer to ELDES

Conguration Tool software. To set the MIN and MAX temperature boundaries, please refer to

section 3 or ELDES Conguration Tool software.

1.15. Additional capabilities

You can also use your mobile to request information about the system, the power supply and

the network quality. Plus you can listen in to what’s happening in the secured location through a

remote microphone. See section 3 for more details.

EPIR2 system comes equipped with built-in wireless module allowing to enhance your securi-

ty system with the addition ELDES wireless PIRs (Passive Infrared Sensors), sirens, magnetic

door and window sensors or expansion modules. See section 2 for more details.

2. HOW TO MANAGE THE WIRELESS DEVICES

IMPORTANT: Before you continue, rst follow the entire section 1. QUICK START and

prepare the system for use as described.

OVERVIEW

Your EPIR2 has a built-in wireless module. This section tells you how to bind and remove a wireless

device using your PC and ELDES Conguration Tool as well as briey describing every available

wireless device which can operate together with your EPIR2 system.

It is possible to connect up to 16 wireless devices to the EPIR2 system. This includes the following:

• EWP1 - wireless PIR sensors (motion detectors);

• EWD1 - magnetic door contacts;

• EWS1 & EWS2 - internal and external sirens;

• EWK1 & EWK2 - wireless keyfobs to arm and disarm the system without using a mobile

phone;

• EKB3W – wireless keypads to arm,disarm and congure the system without using a mobilephone;

• EWF1 – wireless smoke detectors;

• EW1 - wireless zone and PGM output expansion module;

• EW1B - battery-powered wireless zone and PGM output expansion module.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 63 64

Sin comentarios

Eldes EPIR Manual de usuario Pagina 20