Eldes EPIR Manual de usuario descargar pdf (Pagina 30)

30 EN

EPIR2 User Manual v.1.4

ATTENTION: Bypassing a violated tamper is NOT allowed. Please, restore the tamper (for

example: close sensor‘s enclosure) before arming the system

2.3.8. Fault messages

Yellow LED SYSTEM indicates a system fault. SYSTEM LED indications are mentioned in the table

below.

SYSTEM LED Description

Illuminated continously

One ore more high-number tampers (13-34) are violated;

other system fault

Flashing One or more high-number zones (Z13 - Z34) are violated

In order to nd out more about the particular system problem, please enter command A. After this

procedure the system will activate red zone LEDs for 15 seconds. The description on each LED

indication is mentioned in the table below.

Zone LED Description

1 One or more high-number tampers are violated.

2 Backup battery problem.

3 Main power supply problem.

4 Date/time not set.

5 One or more high-number zonesare violated.

6 GSM connection problem.

In order to nd out which particular high-number zone is violated, please enter command B.

In order to nd out which particular high-number tamper is violated, please enter command C.

A. System fault indication - enter command:

[CODE#]

B. Violated high-number zone indication – enter command:

[CODE1]

C. Violated high-number tamper indication – enter command:

[CODE2]

EKB3W indicates up to 12 zones on the keypad, in this section you can learn how to identify higher-

numbered zones (Z13-Z34). The number of the violated high-numbered zone or tamper can be

calculated using the table below according to the formula: number from zone LED section B +

number from zone LED section A.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 63 64

Sin comentarios

Eldes EPIR Manual de usuario Pagina 30