Eldes ESIM264 Manual de instalación Pagina 11
- Pagina / 140
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Manual ElDES ESIM264 v2.2 11
2. Technical Specications
2.1 Electrical & Mechanical Characteristics
Electrical & Mechanical Characteristics
Main Power Supply 16-24V 50 Hz ~1.5A max / 18-24V 1,5A max
Current in Standby without External Sensors and Keyboard Up to 80mA
Recommended Backup Battery Voltage, Capacity 12V; 1,3-7Ah
Recommended Backup Battery Type Lead-Acid
Maximum Battery Charge Current 900mA
GSM Modem Frequency 850/900/1800/1900MHz
Cable Type for GSM Antenna Connection Shielded
Number of Zones on Board 6 (ATZ mode: 12)
Nominal Zone Resistance 5,6k (ATZ Mode: 5,6k and 3,3k)
Number of PGM Outputs on Board 4
PGM Output C1-C4 Circuit
Maximum Commuting PGM Output Values Voltage – 30V; Current – 100mA;
BELL: Siren Output when Activated Connected to COM
BELL: Maximum Siren Output Current 500mA
BELL: Maximum Cable Length for Siren Connection up to 30 meters
BELL: Cable Type for Siren Connection Unshielded
AUX: Auxiliary Equipment Power Supply Voltage 13,8V DC
AUX/BELL: Maximum Accumulative Current of Auxiliary Equip-
ment and Siren
1A
AUX: Maximum Cable Length for Auxiliary Equipment Connection up to 100 meters
AUX: Cable Type for Auxiliary Equipment Connection Unshielded
BUZ: Maximum Current of Mini Buzzer 150mA
BUZ: Power Supply Voltage of Mini Buzzer 5V DC
BUZ: Cable Type for Mini Buzzer Connection Unshielded
Dimensions 140x100x18mm
Operating Temperature Range -20...+55
0
C
Supported Temperature Sensor Model Maxim®/Dallas® DS18S20, DS18B20
DATA: Maximum Cable Length for 1-Wire® Communication up to 30 meters
DATA: Cable Type for 1-Wire® Communication Unshielded
Supported iButton® Key Model Maxim®/Dallas® DS1990A
Maximum Supported Number of Keyboards 4 x EKB2 / EKB3
Y/G: Maximum Cable Length for RS485 Communication up to 100 meters
Y/G: Cable Type for RS485 Communication Unshielded
MIC: Maximum Cable Length for Microphone Connection Up to 2 meters
MIC: Cable Type for Microphone Connection Unshielded
Wireless Transmitter-Receiver Frequency * 868 Mhz
Wireless Communication Range* Up to 30m in premises; up to 150m in open areas
Maximum Supported Number of Wireless Devices* 16
Event Log Size 500 events
Maximum Supported Number of Zones 44
Maximum Supported Number of PGM Outputs 44
Cable Type for Zone and PGM Output Connection Unshielded
Communications SMS, Voice calls. GPRS network, RS485, CSD
Supported Protocols Ademco Contact ID®, 4+2, EGR100, Kronos
* only for system ESIM264 with module EWT1
1 R
OUT
Open Collector Output.
Output is pulled to COM
when turned ON.
- INSTALLATION MANUAL 1
- Contents 3
- Installation Manual v2.2 6
- Limited Liability 7
- Manufacturer Warranty 7
- Package Content 7
- About Installation Manual 7
- 1. General Information 8
- 2. Technical Specications 11
- Fig. No.1 12
- 2.3 Wiring Diagrams 13
- Fig. No. 5 14
- Fig. No. 6 14
- Fig. No. 7 15
- Fig. No. 8 16
- Fig. No. 9 17
- 3. Installation 18
- 4. Operation Description 19
- 4.4 Wireless Devices 21
- 4.5 RS485 Interface 21
- 4.6 1-Wire® Interface 21
- 5. Conguration & Control 23
- CONFIGU 24
- XXXX_STCONFIG 25
- Shut down the 26
- Connection with 26
- Set SMS Language 26
- Set SMS Password 27
- Set User Password 27
- Delete User Password 28
- Replace User Password 28
- Set User Phone 30
- Delete User 30
- List User Phone 31
- Numbers 31
- Set Date & Time 32
- Arm the System 33
- Disarm the System 33
- Enable Arm 34
- Disarm by Zone 34
- Disable Arm 34
- Set Zone Alarm Text 35
- List Violated Zones 35
- Set Entry Delay 36
- List Violated 36
- Set Exit Delay 37
- Enable ATZ Mode 37
- Disable ATZ Mode 37
- - Type 1 38
- - Type 2 38
- - Type 3 38
- - Type 4 38
- - Type 5 38
- Disable Zone 39
- Enable Zone 39
- Bypass Zone 40
- Bypass All Zones 40
- Unbypass Zone 40
- Set Zone Type 41
- Enable Stay Mode 42
- Disable Stay Mode 43
- Activate Stay 43
- Mode Manually 43
- Disable Force Mode 44
- Enable Force Mode 44
- Disable Chime 45
- Enable Chime 46
- List Zone & PGM 46
- Output Status 46
- Set PGM Output Name 47
- Turn ON PGM Output 47
- / Set PGM Output 47
- Startup Status (ON) 47
- Example: 1111_C3:ON:13.23.48 48
- [49xx1#] 49
- [49xx0#] 49
- [3312#] 49
- Disable EPGM8 50
- Module Mode 50
- Set Siren Alarm 50
- Duration 50
- See Siren Alarm 51
- Enable Bell Squawk 51
- Disable Bell Squawk 51
- Info SMS 53
- Set Periodic 53
- Disable Periodic 54
- Disable Call in 54
- Case of Alarm 54
- Enable SMS in Case 61
- Loss/Restore 61
- Set Main Power 61
- Loss Delay 61
- Restore Delay 62
- Remote Listening 62
- Enable Control from 63
- Any Phone Number 63
- Disable Control from 63
- Set Keyboard Partition 64
- Switch Between 64
- Keyboard Partitions 64
- Enable Keyboard 64
- Partition Switch 64
- Set Zone Partition 66
- Set iButton® Partition 66
- Disable Event Log 67
- Enable Event Log 67
- Set Microphone Gain 68
- Set Speaker Level 68
- Reset to Default 69
- Parameters 69
- Menu path: 70
- 6.3 Troubleshooting 74
- 7. Wired Devices 76
- MAIN SCREEN VIEW 82
- DISABLE / ENABLE 85
- PARTITION [0... 1] 85
- 7.2 EKB3 - LED Keyboard 88
- FRONT SIDE 89
- AUX- AUX+ 90
- D1 D2 D3 D4 D5 D6 D7 D8 94
- 7.5 EA1 – Audio Output Module 96
- COM DATA 98
- Enable New iButton® 99
- Key Mode 99
- Disable New 99
- Check iButton® Key ID 100
- Delete iButton® Key ID 100
- Add Wireless Device 101
- Wireless Device Info 103
- Test Wireless Device 103
- EWT1 ESIM264 104
- Wireless Expansion 105
- Module EW1 105
- MAGNET SENSOR 109
- 8.5 EWK1 - Wireless Key-Fob 112
- RESETLED 114
- C1 C2 Z1 Z2 COM 122
- 9. Monitoring Station 124
- Enable Monitoring 125
- Station Mode 125
- Disable Monitoring 125
- Disable Data Message 126
- Enable User Message 127
- Disable User Message 128
- Set Account (Alarm 128
- System ID) 128
- Set Primary 129
- Connection 129
- Set Backup 129
- Connection (-s) 129
- Set Server IP Address 130
- Set Delay after Last 130
- Communication 130
- Set DNS1 Server 131
- IP Address 131
- Set DNS2 Server 131
- Set Server Port 131
- Set Protocol 132
- Set Local Port 132
- Set User 133
- Set Password 133
- Set Prole 133
- Set Unit ID 134
- Set Attempts 134
- Set Monitoring Station 135
- Phone Number 135
- Set Test Period 135
- Delete Monitoring 136
- Station Phone Number 136
- For notes 138
- Made in Lithuania 140
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Eldes ESIM264
(28 paginas)
(44 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.074 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales