Eldes EKB3 Manual de instalación descargar pdf (Pagina 105)

105

105EN

MANUAL ELDES ESIM264 V3.1

30.2.2. Voice Calls and SMS

The system supports up to 3 monitoring station phone numbers for communication with the alarm system by Voice Calls or SMS commu-

nication method. Tel. Number 1 is mandatory, the other two can be used as backup phone numbers and are not necessary. The supported

phone number format is the following:

• International (w/o plus) – The phone numbers must be entered starting with an international country code in the following format:

[international code][area code][local number], example for UK: 4417091111111.

To set up the system for data transmission via Voice Calls or SMS, please follow the basic conguration steps:

1. Enable MS Mode parameter (see 30. MONITORING STATION).

2. Set 4-digit Account number (see 30. MONITORING STATION).

3. Set Tel. Number 1... 3.

Set monitoring station

phone number

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → MS SETTINGS → OK → VOICE CALLS/SMS ST →

OK → TEL. NUMBER 1... 3 → OK → ttteeellnnuumm → OK

Value: aaaa – 4-digit administrator password; ttteeellnnuumm – up to 15 digits monitoring

station phone number.

EKB3

Enter parameter 26, phone number slot & phone number:

26 ps ttteeellnnuumm #

Value: ps – phone number slot, range – [01... 03]; ttteeellnnuumm – up to 15 digits monito-

ring station phone number.

Example: 26014417091111111#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

Delete monitoring

station phone number

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → MS SETTINGS → OK → VOICE CALLS/SMS ST →

OK → TEL. NUMBER 1... 3 → OK → OK

Value: aaaa – 4-digit administrator password.

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

By default, if the initial attempt to transmit data to the monitoring station’s Tel Number 1 via Voice Calls or SMS method is unsuccessful, the

system will make up to 4 additional attempts. After all unsuccessful attempts, the system will continue to communicate with the monitor-

ing station by switching to the next phone number that follows in the sequence and making up to 4 additional attempts if the initial at-

tempt is unsuccessful. If all attempts to all phone numbers are unsuccessful, the system will switch to next backup connection that follows

in the sequence and will attempt to transmit data until it is successfully delivered to the monitoring station.

Set attempts

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → MS SETTINGS → OK → VOICE CALLS/SMS ST →

OK → ATTEMPTS → OK → at → OK

Value: aaaa – 4-digit administrator password; at – number of attempts, range – [1... 10].

EKB3

Enter parameter 37 & number of attempts:

37 at #

Value: at – number of attempts, range – [01... 10].

Example: 3706#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 167 168

Comentarios a estos manuales

Sin comentarios

Eldes EKB3 Manual de instalación Pagina 105

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Eldes EKB3