Eldes EKB3 Manual de instalación descargar pdf (Pagina 141)

141

141EN

MANUAL ELDES ESIM264 V3.1

32.8.1.2. Connector & LED Functionality

COM Common terminal for zones

Z2, Z1 Security zone terminals

C2, C1 PGM output terminals

D1, D2 Pins for restoring default parameters

LED EW1B status

LED

COM

BATTERY

+



32.8.2. Installation

1. Push down the screwdriver and turn it counter-clockwise to un-

screw EW1B enclosure (see Fig. No. 80)

2. Detach the front side of the enclosure by pulling the front side

up (see Fig. No. 81)

80 81

3. Remove the plastic tab inserted between one of the battery

terminals and battery slot contacts (see Fig. No. 82).

4. Connect the ciruit as indicated in Fig. No. 83.

EW1B

Sensor

C1 C2 Z1 Z2 COM

6. Close EW1B enclsoure (see Fig. No. 81, Fig. No. 80).

7. Bind the device to the alarm system by sending a corresponding command via SMS text message or using ELDES Conguration Tool software.

Please, refer to the software‘s HELP section or refer to 19.1. Binding, Removing and Replacing Wireless Devices for more details.

8. The system automatically informs about successful/unsuccessful binding process. If attempt to bind is unsuccessful, try to move EW1B

closer to alarm system device and bind it again.

9. EW1B is ready for use.

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 167 168

Sin comentarios

Eldes EKB3 Manual de instalación Pagina 141