Eldes EKB3 Manual de instalación descargar pdf (Pagina 20)

20 EN

MANUAL ELDES ESIM264 V3.1

3. INSTALLATION

• The system can be installed in a metal or non-ammable cabinet only. For a convenient installation, ME1 metal cabinet is highly recom-

mended. When using a dierent metal cabinet, it is necessary to ground it.

• For the connection of 230V transformer, use 3x0.75 mm

1 thread double isolated cable. 230V power supply cables must not be

grouped with low voltage cable group.

• For the connection of auxiliary and BELL outputs, use 2x0.75 mm

1 thread unshielded cable of up to 100 meters length.

• For the connection of zone/PGM output connectors, use 0.50 mm

1 thread unshielded cable of up to 100 meters length.

System Installation in ME1 Metal Cabinet

1. ME1 metal cabinet components

Tamper switch

to AC main power line

to AC/DC terminals

of ESIM264 system

Phase

Null

blue

brown

Fuse 1A

Transformer

(Primary voltage: 230V AC,

Secondary voltage: 17V 2,35A)

2. Insert the plastic standos into the appropriate mounting points and x the board of ESIM264 on the holders as indicated below.

mounting points

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 167 168

Sin comentarios

Eldes EKB3 Manual de instalación Pagina 20