Eldes EKB3 Manual de instalación descargar pdf (Pagina 54)

54 EN

MANUAL ELDES ESIM264 V3.1

14.7. Bypassing and Activating Zones

ATTENTION: Zone bypassing and activation must be carried out without Conguration mode being activated by the EKB3 keypad.

Zone bypassing allows the user to deactivate a violated zone and arm the system without restoring the zone. If a bypassed zone is violated

or restored during exit/entry delay, or when then system is armed, it will be ignored. When a zone is bypassed, EKB3 keypad indi cator BYPS

will light ON and EKB2 keypad will display BYP message in the home screen view.

Bypass individual

violated zone

EKB2

Menu path:

OK → BYPASS → OK → BYPASS LIST 1... 3 → OK → Z1-zone-name... Z44-zone-name → OK →

BYPASS → OK K

Value: zone-name - up to 24 characters zone name.

EKB3

Press the [BYPS] key, enter zone number & user password:

BYPS nn uuuu #

Value: nn – zone number, range – [01... 44]; uuuu – 4-digit user password.

Example: BYPS091111#

Bypass all violated

zones

EKB2

Menu path:

OK → BYPASS → OK → BYP VIOLATED ZONES → OK

The zone will stay bypassed until the system is disarmed. Once the system is disarmed, the corresponding zone state will be indicated on

the keypads (see 31.1.1. EKB2 – LCD Keypad and 31.1.2. EKB3 – LED Keypad) and Info SMS text message (see 26. SYSTEM INFORMA-

TION. INFO SMS). Alternatively, the user can activate the bypassed zone by the following conguration methods.

Activate bypassed

zone

EKB2

Menu path:

OK → BYPASS → OK → BYPASS LIST 1...3 → OK → Z1-zone-name... Z44-zone-name → OK →

UNBYPASS → OK

Value: zone-name - up to 24 characters zone name.

EKB3

Press the [BYPS[ key, enter zone number & user password:

BYPS nn uuuu #

Value: nn – zone number, range – [01... 44]; uuuu – 4-digit user password.

Example: BYPS251111#

NOTE: Zones can only be bypassed and activated when the system is not armed.

14.8. Zone Names

Each zone has a name that can be customized by the user. Typically, the name species a device type connected to a determined zone

terminal, for Example: Kitchen doors opened. The zone names are used in SMS text messages that are sent to the user during alarm. the

By default, the zone names are: Z1 – Zone1, Z2 – Zone2, Z3 – Zone3, Z4 – Zone4 etc.

Set zone name

SMS

SMS text message content:

ssss_Znn:zone-name

Value: ssss – 4-digit SMS password; nn – zone number, range – [1... 44]; zone-name – up to

24 characters zone name.

Example: 1111_Z3:Door sensor triggered

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

View zone names

SMS

SMS text message content:

ssss_STATUS

Value: ssss – 4-digit SMS password.

Example: 1111_STATUS

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 167 168

Comentarios a estos manuales

Sin comentarios

Eldes EKB3 Manual de instalación Pagina 54

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Eldes EKB3